<noframes id="jj91r">
        <noframes id="jj91r">
          <span id="jj91r"></span>

          Gigabit computer network lightning arrester

          Online Inquiry
          Click Refresh Verification Code

          Details

          Introduction:


          This product is designed according to TIA/EIA568B-2.1 and ISO/IEC11801 standard.The universal RJ45 terminal can connect it to leading end of the protected equipment conveniently.The high quality and high discharge capability electirc surge protector as well as the low capacity and ultra-fast recovery diode matrix structure can provide high energy coarse protection and low energy fine protection to data line,having favorable frequency transmission property as well as higher through flow and fast response speed,which can be used in the integrated wiring of network in office and industry as well as data communication system with similar usage,such as 1000M Ethernet,ATM,ISDN,VOIP network,POE system etc.


          Technical parameter:


          Model

          HD-XNET-1624RJ45/E1000

          Nominal working voltage Un


          36V

          Maximum continuous working voltage Uc


          48V

          Withstand impulse voltage Uoc

          5KV

          Impact current Iimp

          1.5KA

          Nominal discharge current In (8/20μs)


          2.5KA

          Maximum discharging current  Imax(8/20μs)


          5KA

          Voltage protection level Up


          X-X

          130V

          X-G

          600V

          Response time Ta


          1ns

          Operating temperature range Tup


          -40 +70

          Protection grade


          IP20

          Insertion loss


          0.2dB

          Bandwidth fG

          1000M

          Sheathing material


          Metal spraying

          Mode of connection


          series

          Number of guard wire


          1-8 wire

          External dimension


          483*94*45mm

          Fixed way

          1U network cabinets

          Installation method:


          Put an arrester in series at the leading end of the line interface of the protected equipment.”OUT” is equipment end and “IN” is incoming line end.Connect the arrester ground terminal and lightning protection ground lead well (suggested earth resistance≤4Ω)


          Home
          Tel
          Message
          Contact
          长龙助手